其实，中空玻璃加工设备在使用中的保养非常简单，主要是保持滑轮各方面的润滑，保持电压的稳定，防止电器的烧毁。为保证机器的良好运行，应加强机器日常维护与保养，在运行过程中若有异常情况应立即停车检查。排除故障后再重新启动。设备出现较大的的故障时应有人士来维修，在开始检修前切记要关掉总电源。

In fact, the maintenance of hollow glass processing equipment during use is very simple, mainly to maintain lubrication in all aspects of the pulleys, maintain voltage stability, and prevent electrical burning. To ensure the good operation of the machine, daily maintenance and upkeep should be strengthened. If there are any abnormal situations during operation, the machine should be stopped immediately for inspection. After troubleshooting, restart. When there is a major malfunction in the equipment, it should be repaired by professionals. Before starting maintenance, be sure to turn off the main power supply.

传动维护：各传送辊轴承、毛刷辊轴承、传送轴承、链轮、齿轮定期加注钙基润滑脂；微型摆线针轮减速机每半年加钙基润滑脂一次；无级调速器在运转过程中应时常检查其油位，定期更换润滑油，保持油位在滑标中心线以上。

Transmission maintenance: Regularly add calcium based lubricating grease to the bearings of each conveyor roller, brush roller, conveyor bearing, sprocket, and gear; Add calcium based grease to the micro cycloidal gear reducer every six months; During the operation of the stepless speed controller, its oil level should be checked regularly, lubricating oil should be replaced regularly, and the oil level should be maintained above the centerline of the sliding mark.

水路维护：水箱内循环水应每天更换，水箱每周清洗一次，经常检查喷水嘴喷水情况，若发现堵塞应及时清理。

Waterway maintenance: The circulating water in the water tank should be replaced daily, and the water tank should be cleaned once a week. The water spray nozzle should be checked regularly for water spraying. If blockage is found, it should be cleaned in a timely manner.

风路维护：定期检查风机运行情况，如有异常声音应立即停机检查，定期清洗风机过滤栅，减小引风阻力，提高风干后玻璃表面洁净度。

Wind path maintenance: Regularly check the operation of the fan. If there is any abnormal sound, stop the machine immediately for inspection. Regularly clean the fan filter screen to reduce the induced air resistance and improve the cleanliness of the glass surface after air drying.

本文由中空玻璃加工设备提供技术支持，更多的详细精彩内容请点击我们的网站 ，我们将会全心全意为您提供满意的服务。

This article provides technical support from insulated glass processing equipment. For more detailed and exciting content, please click on our website We will wholeheartedly provide you with satisfactory service.